 |
 |  | USB Parallel Printer Adaptor
 Length is 1.5m (end-to-end). Centronics 36-pin male connector. 1.216 Mbps transfer rate. Fully compliant with universal serial bus specifications version 1.1. Supports IEEE-1284 ( bi-directional parallel interface ) specification. Supports windows 98SE/ME/2000//XP. Vista Compatible (No Driver Required)

|
 |
 |
 |  | USB1.1 to Serial Adaptor DB9-Male/Hex Nut
 Description: Allows you to connect any device with any RS-232 or DB9 Male connector to a USB port.
Introduction: The USB Serial Converter is the lightest way to connect your PDA to the USB port on a Mac or PC. This product operates as a bridge between one USB port and a standard RS-232 Serial port. Just connect the cable into any USB port from any RS-232 device or any DB 9P Male connector such as PDA scanner or printer.
Features: Compliant with the Standard Specification of USB 1.1 Supports RS-232 serial interface Supports up to 500 Kbps data transfer rate Detects USB suspend condition Supports Plug & Play specification USB host device drivers available Draws power directly from USB requiring no additional power adapter Vista Compatible (No Driver Required) Prolific chipset

|
 |
 |
 |  | USB1.1 to 4 Port RS232 Serial Adaptor DB9
 The USB to 4-port-Serial Converter is a low-cost high-performance device. It operates as a bridge and provides single and easy connection between one USB port and four-serial ports. Each serial port can be independently configured into various synchronous and asynchronous interfaces. Users can have the option to operate multiple devices at the same time.
This product is designed to accommodate those peripherals with serial-port like cellular phone digital camera modem mouse PDA GPS ISDN terminal adapter etc.
Data buffers for upstream and downstream on each port Compliant with remote wake-up and power management Frees your PC RS-232-port for other uses.
Package include: One 6Ft USB A/B cable included. Driver CD
Compatibility Windows 98/SE/ME/2000/XP mac OS8.6/OS9/OSX Linux 2.40 up FTDI chipset

|
 |
 |
 |  | USB1.1 to 2 Port RS232 Serial Adaptor DB9
 The USB to 2-port-Serial Converter is a low-cost high-performance device. It operates as a bridge and provides single and easy connection between one USB port and two-serial ports. Each serial port can be independently configured into various synchronous and asynchronous interfaces. Users can have the option to operate multiple devices at the same time.
This product is designed to accommodate those peripherals with serial-port like cellular phone digital camera modem mouse PDA GPS ISDN terminal adapter etc.
Data buffers for upstream and downstream on each port Compliant with remote wake-up and power management Frees your PC RS-232-port for other uses. FTDI chipset

|
 |
 |
|  | USB1.1 - Serial Adaptor DB9-M w/Thumbscrew
 Description: Allows you to connect any device with any RS-232 or DB9 Male connector to a USB port.
Introduction: The USB Serial Converter is the lightest way to connect your PDA to the USB port on a Mac or PC. This product operates as a bridge between one USB port and a standard RS-232 Serial port. Just connect the cable into any USB port from any RS-232 device or any DB 9P Male connector such as PDA scanner or printer.
Features: Compliant with the Standard Specification of USB 1.1 Supports RS-232 serial interface Supports up to 500 Kbps data transfer rate Detects USB suspend condition Supports Plug & Play specification USB host device drivers available Draws power directly from USB requiring no additional power adapter Vista Compatible (No Driver Required) Prolific chipset

|
 |
 |
 |  | USB 2.0 to 2.5/3.5 inch SATA Triple Adaptor
 USB2.0 compatible Win XP/2000/ME/98SE Windows Vista Compatible Supports 3.5in and 2.5in IDE and SATA HDD Supports Ultra ATA/133 and UDMA5
Package include: 1. USB2.0 SATA/IDE adapter 2. SATA 7pin cable 3. SATA 15pin to 4pin male adapter 4 Power supply w/cord 5. Driver CD 6. Manual

|
 |
 |
 |  | USB1.1 to 10/100 Ethernet Adaptor
 IEEE 802.3 MII compliant. Support USB suspend / resume detection logic wake-up frame link status change. Automatically available for 10/100M speed rate. IBM PC 486X-100MHz or higher or compatible system. Compatible with Windows 98 XP ME 2000 or higher.

|
 |
 |
 |  | USB1.1 150Ft Extender Via Ethernet
 USB1.1 compatible Allows a USB device to have its cable length extended up to 150Ft No driver needed Win 98SE/ME/2000/XP OS9.X/10.X Interconnect cable: Cat.5/5E/6

|
 |
 |
 |  | USB 1.1 to 2x PS/2 Female Adaptor

|
 |
 |
 |  | USB 2.0 Dock Station
 USB1.1/2.0 compatible One serial port One IEEE1284 parallel port Two USB port One 10/100 Ethernet port Two PS/2 port One USB file transfer port Power supply included

|
 |
 |
 |  | USB to 2Port RS422/RS485 Converter DB9
 The USB to 2port RS422/485 converter is housed in a strong enclosure designed for use in rugged application areas . USB adds a Windows serial Com port via its USB connection and can be configured to work with RS-422 and RS485 peripherals such as POS and Industrial Control devices. USB Plug and Play allows easy serial port expansion and requires no IRQ DMA or I/O port resources. It supports data transfer rates of up to 1 million bps. No external power supply is required as USB converter takes its power from the USB bus
Full compliance with the USB Specification 1.1 Over 1Mbps transfer rate per port Compatible Windows98/SE/ME/2000/XP. Mac OS 8.6/OS-9/OS-X FTDI chipset

|
 |
 |
 |  | USB to RS422/485 Converter RJ11
 This USB converter adds a Window serial port via its USB connection and can be configured to work with RS-422 and RS-485 peripherals such as industrial control devices.
Features a full set of RS-422/RS485 data and control signals on its RJ11 jack. It supports data transfer rates up to 3Mbps. No external power supply required, bus-powered.
Full compliance with the USB Spec 1.1
Compatible with Windows98/SE/ME/2000/XP. Mac OS 8.6/OS-9/OS-X, Linux

|
 |
 |
 |  | Infrared to USB Adaptor
 Specifications: Compliant with USB specification Revision 1.1 Fully compliance to IrDA 1.3 specification IR data rates from 2.4K to 115.2Kbps (SIR Mode) 576-1.152Mbps (MIR Mode) and 4Mbps (FIR Mode) Fully Plug-N Play Bus-power no external AC adapter required Supports Windows 98SE/Me/2000/XP
Package contents: USB Infra-Red adapter USB extension cable software driver CD User manual

|
 |