 |
| | XVideo10 Video Camera Switch for X10 Systems
The XVideo10 is a video switch that allows you to switch between video cameras based on X10 motion detectors, X10 software, or X10 manual controllers. It is designed to be directly connected to a X10 CM11A Computer Interface (part of the X10 CK11 Kit). No computer is required, but a computer can be used to change the default house code if desired.
|
|
|
| | CamWatch4 - 4 camera video sequencer
Easy to use low profile video sequencer. Cycle between up to 4 cameras (or other sources). Ready to go for 4 cameras out of the box. Easy onboard menu allows configuration for 2 or 3 cameras and adjustable scan rate. Configure thru your PC/Mac/Linux serial port.
|
|
|
 | | RSVSwitch - 4 Camera Video Switch w/ Advanced Computer Controls
Switch four video cameras to a single video monitor or capture card. Works in standalone or PC connected modes. Controllable thru RS-232 port using a terminal program, software or roll your own code for custom applications. Use with PHP, DOS, Perl, C, VB or even PowerPoint. Compatible with any computer that supports RS-232 communications. USB adaptor available.
|
|
|
| | Memory Player (Card Reader + TV Out)
Memory player plays back digital photo/movie on your TV/Projector/PC.
TV Encoder Inside (NTSC/ PAL)
Support JPEG Decoder
Support CF/ SM/ SD/ MMC/ MS/ MS PRO Flash-Memory Cards Interface ( XD not included )
Support OSD Function on TV
Resolutions up to 6M pixels
Works with various types of devices which have AV input; such as Television Projector LCD monitor and so on.
Support motion JPEG and file name of mov and avi movie clip (640 X 480 X 25 frame /sec) displayed which are taken by Digital still camera (mpg file not included )
Support simple photo editing functions like: Delete Preview Slide show Rotation 5 times zoom in and zoom out.
Accessories.
Power supply USB cable Audio Cable
Input signal: Type I/II Compact Flash/IBM Microdrive SmartMedia Secure Digital/MultiMediaCard Memory Stick/Memory Stick PRO
Output signal: Composite analog or USB 1.1
Data format: YUV 4-2-2 YUV 4-2-0 YUV 4-4-4 RGB 24bits
Power requirement: DC 5V 1A
Operation System:Windows ME/2000 SP3/XP. Mac OS 10.2 or above
System output: NTSC/PAL
|
|
|
 | | PCI TV/FM Tuner Card
Provides television digital video recorder and FM radio capabilities to your PC
Pre-schedule recordings of TV programs
Time Shifting allows you to pause a live broadcasting and then return to it after few minutes
Supports Netmeeting for videoconferencing allowing consumer to use a camcorder for video chatting
Supports various input devices such as TV antenna cable TV DVD player Camcorders VCR etc
Supports PAL-N PAL-M SECAM and NTSC video standards
|
|
|
 | | RCA Male-to-Female Attenuator/Resistive load
Video attenuator, 150 ohm. Reduces signal levels for video and audio lines. 1/8 watt. Not for high voltage or speakers. Use with video/audio line level (line in jacks). Good for limiting brightness on PC capture cards when low end cameras are used.
|
|
|
 | | USB 2.0 Audio/Video Grabber - Vista Compatible
USB Video interface to capture audio/video. Use with your camcorder, video camera, DVD player or any device with a composite video or S-Video output. Simpler and easier to move around than a video capture card, does not require a slot. - Bus powered
- S-Video and composite video support
- NTSC, PAL or SECAM
- 30fps
- Up to 720x480 resolutions
- USB 2.0 and 3.5mm audio output
- RCA Video and Audio and S-Video inputs.
- Bundled with Acrosoft ShowBiz DVD Software
- Multi-language support
- Windows 2000/XP/Vista compatible.
Alt ID: VC-211V
|
|
